Valve guides

To remove and to fit

Special requirements

Operation -9

To remove

  Remove the cylinder head, Operation -5.

2  Remove the valves, Operation -7.

  Use the special tool (A), GE5004, and a hammer to drive the valve guide (A2) from the cylinder head.

To fit

  Apply clean engine oil to the outside diameter of the new valve guides.

2800

2 Use the special tool (B), GE5004, together with the sleeve (B2), GE50044, to install the valve guide. The

guide must protrude from the cylinder head, as  shown (C), by 5,0 +/- 0,5 mm (.8 +/- 0.02 in).

Refer to Chapter 2, Specifications for the correct dimensions for the inside diameter of new and used valve

guides.

  When a new valve guide has been fitted, check that there is full contact between the valve and the valve

seat. If necessary, lap the valve to the seat.

4  Fit the valves, Operation -7.

5  Fit the cy linder head, Operation -5.

TAD1241GE氣門，發電機組2506C E15TAG3配件，帕金斯4008TAG 2配件，Perkins 403c氣缸墊

Perkins 1106C油管，沃爾沃柴油發電機配件供應商 ，帕金斯配件濟南，鉑金斯發動機驅軸油封，珀金斯柴油機濾芯，帕金斯機油濾清，帕金斯中冷增壓器多少錢，perkins 2614b562皮帶